Omnia CLR45
Omnia CLR45
Omnia CLR45
Omnia CLR45
Omnia CLR45
Omnia CLR45
Omnia CLR45
Omnia CLR45
Omnia CLR45
Omnia CLR45
Omnia CLR45

Omnia CLR45

Regular price€999,00
Tax included.
  • Free worldwide shipping
  • In stock, ready to ship
  • Inventory on the way

What if you can fit your road bike with all-road UCI-approved wheels? Our new Omnia CLR45 are just that: carbon wheels that perform very well on the road and are strong enough for the occasional light gravel adventure. Fit them with some grippy gravel tyres and you are ready to go.

The biggest bang for buck wheels for your road bike? Meet our brand new 45mm carbon aero rims, the Omnia CLR45! The sleek wheels are fitted with our latest 12mm thru-axle IONA hubs including the much-appraised SKF bearings. With an internal rim measure of 21mm you can fit all modern-size road tires (25 mm to 32 mm). You can even take them off-road on a gravel experience using gravel tires up to 57mm.

The new Omnia CLR45 wheels are Tubeless Ready. We’ve already set them up with tubeless rim tape for easy use. We use Sapim spokes to complete the deal. Spare spokes are included with the wheels.

New CLR45 Road rim

The Omnia CLR45 is a lightweight rim made of unidirectional carbon with a wider 21mm inner measure. That way you can easily fit wider road or gravel tires. Furthermore, the rim has excellent damping and anti-vibration characteristics.

New Iona hubs

Ere Research Iona hubs are a 100% in-house manufactured design. The hubs are bulletproof and will practically run forever when properly taken care of. The straight-pull hubset has a low profile and a sturdy design. Its angled flange supports the directional torque going through the hub body, so it can take any beating.

Torque 2 design

Torque 2 takes the forces that the hub absorbs from the disc brake load when braking. When the rear wheel gets torque from the hub body when pressure is applied through the chain and cassette, it directs those forces where the material is strongest. That way we can remove material where we can and add material where needed.

Our new Iona hubs are as light as possible, but without compromising on strength and reliability. At the same time, we accomplished keeping the structural integrity with a very thin wall design made from very high-grade aluminium. This results in weights as low as 235grams for the rear hub and 100 grams for the front hub.



Intended use Performance Aero Road
Total set weight 1.560 gram  (1-3% tolerance)
Front wheel weight 710 gram
Rear wheel weight 850 gram  
Tyre compatibility Clincher (wired/foldable)/tubeless  
Recommended tyre width 26C - 30C  
Minimim tyre width 23C  
Maximum tyre width 36C  
Maximum rider weight 140 kg   
Brake System Disc brake only  
Race-Ready YES - UCI approved  
Warranty Lifetime*  
Crash replacement Lifetime  
 * Registering your wheels after purchase will extend your warranty to lifetime warranty
Rims Front Rear
 Rim material full carbon full carbon 
 Rim height 45mm 45mm 
 Rim size  (ETRTO) 700C / 28" 700C / 28"
 External rim width 28mm 28mm 
 Internal Rim width 21mm  21mm 
 Rim type Clincher/tubeless  Clincher/tubeless 
 Tubeless (ready) Yes* Yes* 
 Tubeless Tape Ere ProClose 26 Ere ProClose 26
 * Tubeless tape is fitted to the rims. Recommended tubeless tape width is 26mm
Hubs Front Rear
Hub material Alloy  Alloy
Bearings 2 x SKF  4 x SKF
Engagement system 4-pawl
Compatibility Shimano/SRAM/Campagnolo
Axle System TA 100 x 12mm TA 142 x 12mm 
Brake Interface Centerlock Centerlock


Spokes Front Rear
Spoke Sapim CX Leader Black Sapim CX Leader Black 
Spoke count 20 24
Spoke type Straightpull Aero Straightpull Aero
Spoke length NDS/DS 283/281 276/274 
Nipples Black / alloy Black / alloy
Spoke tension DS 1000-1350Nm / NDS 950-1050Nm DS 1000-1350Nm / NDS 950-1050Nm

• Front Wheel
• Rear Wheel
• Rear hub body spacers (9, 10spd)
• 6 Spare spokes (274, 276, 281 and 283mm)
• 6 spare black nipples
• Ere ProClose 26 Tubeless rimtape is fitted to the wheels

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


All orders under 100 will be shipped with a shipping fee of 7,50. Orders over 100 have no shipping charges.


Your order will be processed immediately. Normally all orders placed before 17:00 CET will be shipped that day. We will not ship out any products during weekends and public holidays.  

You will receive a shipping confirmation with track and trace information. Normal delivery time is 2-3 days for orders inside Europe. Global shipping might take a few days more to get there. Don't worry, you will always be able to track and trace your parcel.



Omnia CLR45

For the most demanding road racing conditions. The strength of these wheels show not only through UCI type approval, but also the maximum rider weight limit of 140 kg.

The Ere Research Omnia CLR45 is strong enough to withstand even the worst gravel conditions.

Omnia CLR45 wheels come standard with industrial sealed SKF bearings. Optionally we offer upgrades with ceramic bearings for superlow rolling restistance. Designed to keep your wheels spinning.

For Ere Omnia CLR45 wheels we use Sapim spokes made from heat treated double butted alloy. The aero spokes offer up to 30% weight saving without compromising strength. The black aero spokes are straightpull and come fitted to the wheels with black alloy nipples. The alloy nipples come in at 0.3 gram.

Complete your bike with Omnia

Recently viewed